X-rite i1 display 2




x-rite i1 display 2

Conclusion Overall, the english calibration process with the episode i1 Display 2 software was easy, with some good guidance as you go through.
When you compare this episode to the LaCie products, the Blue Eye Pro is subbed 369 and subbed the trimmed down Blue Eye 2 is 299.The screen piece felt much more comfortable than english at default settings, and colours were vivid and even.Easily attaches to both LCD and CRT monitors with built-in counterweight and suction english cups.Note that the black depth reading is rounded to the nearest.1, and so alternative software is needed episode to determine if this is between.15 and.2 cd/m2.Product Features: Compact colorimeter for emissive color measurements of LCD, CRT and laptop displays.LaCie would consider the colouor fidelity to be excellent.The process didn't take too long, perhaps 10 minutes in display total, and the results subbed were certainly pleasing.Again, the screen is corrected within 2 of this luminance, and is calibrated to 122 cd/m2.We just need to find out if their software package produces good results.Only luminance was a little out at 109 cd/m2, being 9 out from the desired level.Also known as the '.Dell paint 2405FPW - Calibrated paint Results X-Rite i1 Display 2 Calibrated Settings luminance (cd/m2) 109 Black Point (cd/m2).15 Contrast Ratio 727:1 If you compare these results with the default settings shown earlier on in this review, you can see there is a vast improvement.I then returned the screen and graphics card to their default settings and tested again.Brightness in the OSD was also now back at a level.If these were spaced out more, it can result in poor perceived contrast in certain tones and often can lead to banding in colours.The next stage is an automatic calibration adjustment which piece take approximately 3 minutes to complete. After calibration, the screen matches this exactly.
On the next section you are asked game to define your target settings for the calibration.

The following stage asks you to calibrate the luminance (brightness) of the screen.
The Display 2 product offers Workgroup match, monitor validation and trending graphs, advanced user modes, user defined x-rite i1 display 2 gamma and white point levels, luminance measurement, and the full i1Match software package.


Sitemap